Tool

VAG / Ford / MAN 2.0 TDI (MD1CS004 and MD1CS104) ECU Unlock Now Available!

VAG / Ford / MAN 2.0 TDI (MD1CS004 and MD1CS104) ECU Unlock Now Available!

New AT Protocol!

Dear Users,

Tuning options for the VAG group's flagship diesel engines are taking a major leap forward on your AutoTuner Tool!

As you know, our Tool already supported certain variants of the MD1CS004 H80 ECU directly via the diagnostic port (OBD). However, due to continuous factory software updates and sophisticated security patches, a significant number of these ECUs remained completely locked and out of reach for workshops.

Today, we are removing all limitations with our Mail-in Unlock service! This strategic update allows you to open up Bench mode access for these modules. Most importantly, it covers all MD1CS004 variants that were previously unsupported via OBD, while simultaneously adding full support for the brand-new MD1CS104 ECU (up to 2025 models).

🔒 A secure workflow (Mail-in ➡️ Bench): To safely bypass the toughest factory protections on these modern 2.0 TDI CR engines (EA288 evo generations and beyond), a seamless two-step workflow is now available:

  1. Mail-in Unlock: Send the ECU to our headquarters for a secure hardware unlock by our engineering specialists.

  2. Bench: Once returned to your shop, software locks are a thing of the past. You gain unrestricted Bench NR access to read and flash directly on your workbench!

Coverage Highlights (2.0 TDI / 2.0 EcoBlue Engines):

  • Audi: A3, A4, A5, A6, A7, Q2, Q3, Q5, SQ5 (30/35/40 TDI variants) — from 2012 to 2025 models.

  • Volkswagen: Golf (7, 8 & GTD), Passat, Tiguan, Arteon, Caddy, T-Roc, and the brand-new Tayron (2025).

  • Commercial Vehicles: Transporter / Multivan (T6/T7), VW Crafter (2023+), MAN TGE (2023+).

  • Cupra, Seat & Skoda: Formentor, Leon, Ateca, Tarraco, Octavia, Superb, Kodiaq, Karoq.

  • Ford (Shared platform): Tourneo Connect & Transit Courier (2.0 EcoBlue).

Update your software today and confidently unlock 100% of Europe's most popular diesel segment!

The AT Team

Key Features

  • Type: Engine Control Unit (ECU) ⚙️
  • Mode: BENCH NR 🔌
  • MCU: TC298 / TC389 - HW80 🖥️
  • Read time: 2min ⏱️
  • Write time: 30sec ⏱️
  • Checksums correction ✅
  • Backup creation 🔄
  • Mail-in Unlock required 📦

Compatibility List*

🚗 Audi Models: A3 (2012 - 2024) / A4 (2008 - 2018) / A5 (2011 - 2024) / A6 (2011 - 2025) / A7 (2018) / Q2 (2016) / Q3 (2011 - 2025) / Q5 (2012 - 2024) / SQ5 (2019)
🔧 Audi Engines: 2.0 TDI / 2.0 TDI CR EU6 / 30 TDI (2.0) / 35 TDI (2.0) / 40 TDI (2.0)

🚗 Cupra Model: Formentor (2020 - 2025)
🔧 Cupra Engine: 2.0 TDI CR EU6

🚗 Ford Models: Tourneo Connect (2021) / Transit Courier (2023)
🔧 Ford Engine: 2.0 EcoBlue

🚗 MAN Model: TGE (2023)
🔧 MAN Engine: 2.0 TDI CR EU6.2

🚗 Seat Models: Alhambra (2015) / Ateca (2016 - 2020) / Leon (2013 - 2020) / Tarraco (2019)
🔧 Seat Engines: 2.0 TDI CR EU6 / 2.0 TDI CR EU6.2

🚗 Skoda Models: Karoq (2017 - 2022) / Kodiaq (2017 - 2023) / Octavia (2013 - 2020) / Superb (2015 - 2023) / Yeti (2008 - 2014)
🔧 Skoda Engines: 2.0 TDI CR EU6 / 2.0 TDI CR EU6.2

🚗 Volkswagen Models: Arteon (2017 - 2020) / Caddy (2015 - 2021) / Coccinelle / Beetle (2011) / Crafter (2023) / Golf (2012 - 2024) / Golf Sportvan (2014) / Jetta (2010 - 2014) / Passat (2015 - 2023) / Passat CC (2013) / Scirocco (2014) / Sharan (2015) / T-Roc (2017) / Tayron (2025) / Tiguan (2016 - 2024) / Touran (2016) / Transporter / Multivan / Caravelle (2015 - 2021)
🔧 Volkswagen Engines: 2.0 TDI CR / 2.0 TDI CR EU6 / 2.0 TDI CR EU6.2 / 2.0 TDI GTD

*The list may evolve over time.

Blog posts

View all
ToolMaserati MC20, GranCabrio, Grantourismo, Grecale, and MCPura ECU Now Unlocked!

Maserati MC20, GranCabrio, Grantourismo, Grecale, and MCPura ECU Now Unlocked!

Maserati 3.0T owners, now it’s your turn! It's time to show the world what this platform can really do. We can unlock your Bosch MG1CS039 ECU right here at our HQ in Auburn, Alabama. Once unlocked,...

ToolLate 90's BMW with Siemens MS42 ECUs now 100% OBD on the Tool!

Late 90's BMW with Siemens MS42 ECUs now 100% OBD on the Tool!

Siemens MS42 OBD Protocol Release! Dear Users, Take full control over legendary late-90s Bavarian straight-six powerplants! We are thrilled to announce official support for the Siemens MS42 ECU via...

ToolBosch MSE9.0: CFMOTO, Loncin, Voge, Zontes, and ZXMOTO

Bosch MSE9.0: CFMOTO, Loncin, Voge, Zontes, and ZXMOTO

New AT protocol! Dear Users, The Bosch MSE9.0 is now supported on your AutoTuner Tool, and it opens the door to Powersports. This protocol covers a wide range of latest-generation Powersports vehic...

Want to know more?

Discover our story

About AutoTuner